The WELDPLAST S2 TPO extruder is designed specifically to process thermoplastic elastomers with an olefin base. This type of plastic requires a different plasticization process, as well as specific extruder screws. TPO plastics are used primarily in tunnel construction and underground engineering. In this kind of work and application, the WELDPLAST S2 TPO makes the most of its size and weight due to a large part of the welds taking place overhead. These applications can only be handled over a longer period of time with such a light device.
| NAME | METRIC | IMPERIAL |
|---|---|---|
| ARTICLE | 136.602 | 136.602 |
| VOLTAGE | 230 V | 230 V |
| POWER | 3000 W | 3000 W |
| FREQUENCY | 50/60 Hz | 50/60 Hz |
| MAX. MATERIAL OUTPUT | 2.0 kg/h | 4.4 lb/h |
| WELDING ADDITIVE | ø 3mm/ 0.12 in , ø 4 mm / 0.16 in | ø 3mm/ 0.12 in , ø 4 mm / 0.16 in |
| WELDING MATERIALS | TPO , FPO , HD-PE , LD-PE , LLD-PE , PP | TPO , FPO , HD-PE , LD-PE , LLD-PE , PP |
| AIR GUIDE | Internal | Internal |
| SCREW HEATING | Coil heater | Coil heater |
| LENGTH | 450.0 mm | 17.71 in |
| WIDTH | 98.0 mm | 3.85 in |
| HEIGHT | 260.0 mm | 10.23 in |
| WEIGHT ⓘ | 5.8 kg | 12.78 lb |
| AIR TEMPERATURE CONTROL | Closed loop | Closed loop |
| PLUG | EU, 3 poles, 16A | EU, 3 poles, 16A |
| PROTECTION CLASS | I | I |
| CONFORMITY MARK | CE | CE |
| COUNTRY OF ORIGIN | CH | CH |
Thanks to its TPO processing ability, this extrusion welder is used most of all in tunnel construction and underground engineering.
Technical Datasheet
WELDPLAST_S2_TPO_136-602_en
WELDPLAST-S2-TPO_136-602_en.pdf (336 downloads)
Operating Instructions
WELDPLAST_S2
WELDPLAST-S2-Catalogue.pdf (158 downloads)
General Catalogue
Plastic Welding
Plastic-Welding-1.pdf (2516 downloads)
