The WELDPLAST S6 is the largest extruder from Leister. Due to its high output and design, it is suitable for users working in underground engineering. Its specialized grip allows for a wide range of working positions. Additionally, the extrusion welder functions reliably, even under difficult conditions that can occur at any construction site.
In addition, the WELDPLAST S6 is used in equipment and container construction when large welds are needed. These are usually found in high-volume containers at the joints between basal and wall plates.
| NAME | METRIC | IMPERIAL |
|---|---|---|
| ARTICLE | 134.318 | 134.318 |
| VOLTAGE | 230 V | 230 V |
| POWER | 4600 W | 4600 W |
| FREQUENCY | 50/60 Hz | 50/60 Hz |
| MAX. MATERIAL OUTPUT | 6.0 kg/h | 13.22 lb/h |
| WELDING ADDITIVE | ø 4 mm / 0.16 in , ø 5 mm / 0.2 in | ø 4 mm / 0.16 in , ø 5 mm / 0.2 in |
| WELDING MATERIALS | HD-PE , LD-PE , LLD-PE , PP | HD-PE , LD-PE , LLD-PE , PP |
| AIR GUIDE | External | External |
| SCREW HEATING | Coil heater | Coil heater |
| LENGTH | 821.0 mm | 32.32 in |
| WIDTH | 116.0 mm | 4.56 in |
| HEIGHT | 240.0 mm | 9.44 in |
| WEIGHT ⓘ | 14.0 kg | 30.86 lb |
| AIR TEMPERATURE CONTROL | Closed loop | Closed loop |
| PLUG | CEE blue, 3 poles, 32A | CEE blue, 3 poles, 32A |
| PROTECTION CLASS | I | I |
| CONFORMITY MARK | CE | CE |
| COUNTRY OF ORIGIN | CH | CH |
This welder extrudes up to 6 kg (13.2 lbs.) output per hour and has the highest pre-heating performance of any Leister extruder.
The extruder’s specialized handle runs all the way around the device and allows work in different positions.
Technical Datasheet
WELDPLAST_S6_134-318_en
WELDPLAST-S6_134-318_en.pdf (257 downloads)
Operating Instructions
WELDPLAST_S6
WELDPLAST-S6.pdf (128 downloads)
General Catalogue
Plastic Welding
Plastic-Welding-1.pdf (2162 downloads)
